﻿GPD Win4 v1.4 手感增强握把3D打印套件说明：

GPD Win4 v1.4 grip of 3D printing description:

GPD_Win4_Gamepad.STL （不兼容官方底座，强度与稳定性最好，支持边玩游戏边蹦迪，拆装略紧，适合长期固定使用）

GPD_Win4_Gamepad.STL (don't support official dock, but it has the best strength and stability, suitable for regular attaching using, tightest)

GPD_Win4_GP_ST.stl （兼容官方底座，强度与稳定性中等，不太能蹦迪玩，拆装很方便）

GPD_Win4_GP_ST.stl (support official dock, mid strength and stability, mid tight)

GPD_Win4_ST.stl （配合上面文件使用，官方底座增高件，兼容win3，win4底座，需去掉原装背板）

GPD_Win4_ST.stl (it's a modification of the official dock, support Win3 and Win4 dock, please take the original board off to use it with above grips)

其他说明：

Others:

1，原机尺寸来自3D扫描文件（标称精度0.05mm），个人购买的黑色机器不易扫描，因此套件尺寸中含有一套白色痛机贴公差，如果您的机器也贴了痛机贴无需去除。

1, The demensions come from 3D scaner(nominal accuracy 0.05mm), I own the black edition and it hard to scaned on so I installed the white skin on, so the grip support skin also if your unit weared it.

2，手握把部分来自Xbox SX 原装手柄1：1扫描，未做任何修改。

2, The part of grip comes from Xbox SX original, 1:1 scan without mods.

3，3D打印件背部支撑去除后难免会有各种小瑕疵，稍加锉刀或砂纸打磨手感效果更佳。（很简单，几分钟的事）

3, Please use the sandpaper to polish the grip after printing done to make the surface smooth

4，很抱歉当前版本完全挡住了SD卡和摇杆鼠标模式切换按钮，那个位置开孔和设计冲突很大，手柄伴侣是相对完美的替代方案。

4, Sorry for that SD card reader and switch of controller/mouse are covered in current version, that position is hard to make a hole on, so the temporary way is using controller partner.

关于打印材料：

About the materials

如果您不具备家庭打印条件并且对3D打印完全不了解，淘宝和闲鱼有很多3D打印服务，STL文件选择您需要的直接发给对方，尺寸已核对好。

最推荐的是ABS和PLA，材料轻，强度高，价格很便宜，ABS强度最好，难拆卸与安装稍困难，PLA则不会，但随着时间推移会有一定程度缩胶（几乎无需担心）。

尼龙价格昂贵的材料不建议选择，树脂刚性太大很容易碎裂同样不建议选择。

If you can't do 3D printing with self and you want let other people to print that for you,  just choose the STL file you which need and send it directly to them. The sizes are all available.

The most recommended are ABS and PLA, light material, high strength, cheap price, ABS has best strength, but it a little bit difficult to assembling , PLA is smooth for assembling , but might a few shrinkage will happen with time passing  (almost no need to worry).

Nylon is expensive material so not recommended here, resin has large rigidity and easy to fracture also not recommended here.

如果您自己有打印机，背面60-65度加支撑确保与机器贴合面的精度，10%-20%内部立方体填充取决于您对重量的要求，强度上没什么差别。

If you have own printer, please do 60-65 degree on the back board to ensures the accurate fit with the unit, and 10%-20% inner cube filling depending on your requirement of the weight, they are no difference in strength.

最后感谢 GPDwin4 -4群大家的鼓励，也希望有更多朋友在这套文件的基础上继续优化和改造。

Thanks for all friends which in GPD WIN 4-4 QQ group, hope you can enjoy this grip and keep updating/modifying on it.

——BY lixiaoyaoii